# Makefile.in generated by automake 1.14.1 from Makefile.am.
# lib/php/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994-2013 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



#
# Licensed to the Apache Software Foundation (ASF) under one
# or more contributor license agreements. See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership. The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License. You may obtain a copy of the License at
#
#   http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing,
# software distributed under the License is distributed on an
# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
# KIND, either express or implied. See the License for the
# specific language governing permissions and limitations
# under the License.
#



am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/thrift
pkgincludedir = $(includedir)/thrift
pkglibdir = $(libdir)/thrift
pkglibexecdir = $(libexecdir)/thrift
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i686-pc-cygwin
host_triplet = i686-pc-cygwin
subdir = lib/php
DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/aclocal/ac_prog_bison.m4 \
	$(top_srcdir)/aclocal/ax_boost_base.m4 \
	$(top_srcdir)/aclocal/ax_check_openssl.m4 \
	$(top_srcdir)/aclocal/ax_cxx_compile_stdcxx_11.m4 \
	$(top_srcdir)/aclocal/ax_dmd.m4 \
	$(top_srcdir)/aclocal/ax_javac_and_java.m4 \
	$(top_srcdir)/aclocal/ax_lib_event.m4 \
	$(top_srcdir)/aclocal/ax_lib_zlib.m4 \
	$(top_srcdir)/aclocal/ax_prog_perl_modules.m4 \
	$(top_srcdir)/aclocal/ax_signed_right_shift.m4 \
	$(top_srcdir)/aclocal/ax_thrift_internal.m4 \
	$(top_srcdir)/aclocal/libtool.m4 \
	$(top_srcdir)/aclocal/ltoptions.m4 \
	$(top_srcdir)/aclocal/ltsugar.m4 \
	$(top_srcdir)/aclocal/ltversion.m4 \
	$(top_srcdir)/aclocal/lt~obsolete.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h \
	$(top_builddir)/lib/cpp/src/thrift/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__uninstall_files_from_dir = { \
  test -z "$$files" \
    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
         $(am__cd) "$$dir" && rm -f $$files; }; \
  }
am__installdirs = "$(DESTDIR)$(phpmoduledir)" \
	"$(DESTDIR)$(phpbasedir)" "$(DESTDIR)$(phpclassloaderdir)" \
	"$(DESTDIR)$(phpconfdir)" "$(DESTDIR)$(phpexceptiondir)" \
	"$(DESTDIR)$(phpfactorydir)" "$(DESTDIR)$(phpprotocoldir)" \
	"$(DESTDIR)$(phpprotocoljsondir)" \
	"$(DESTDIR)$(phpserializerdir)" "$(DESTDIR)$(phpserverdir)" \
	"$(DESTDIR)$(phpstringfuncdir)" "$(DESTDIR)$(phptransportdir)" \
	"$(DESTDIR)$(phptypedir)"
SCRIPTS = $(phpmodule_SCRIPTS)
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
	ctags-recursive dvi-recursive html-recursive info-recursive \
	install-data-recursive install-dvi-recursive \
	install-exec-recursive install-html-recursive \
	install-info-recursive install-pdf-recursive \
	install-ps-recursive install-recursive installcheck-recursive \
	installdirs-recursive pdf-recursive ps-recursive \
	tags-recursive uninstall-recursive
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
DATA = $(phpbase_DATA) $(phpclassloader_DATA) $(phpconf_DATA) \
	$(phpexception_DATA) $(phpfactory_DATA) $(phpprotocol_DATA) \
	$(phpprotocoljson_DATA) $(phpserializer_DATA) \
	$(phpserver_DATA) $(phpstringfunc_DATA) $(phptransport_DATA) \
	$(phptype_DATA)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
am__recursive_targets = \
  $(RECURSIVE_TARGETS) \
  $(RECURSIVE_CLEAN_TARGETS) \
  $(am__extra_recursive_targets)
AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
	distdir
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates.  Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
  BEGIN { nonempty = 0; } \
  { items[$$0] = 1; nonempty = 1; } \
  END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique.  This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
  list='$(am__tagged_files)'; \
  unique=`for i in $$list; do \
    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
  done | $(am__uniquify_input)`
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = test
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
ACLOCAL = ${SHELL} /home/Eion/win32-dev/thrift-0.9.2/missing aclocal-1.14
ALLOCA = 
AMTAR = $${TAR-tar}
AM_DEFAULT_VERBOSITY = 1
ANT = 
ANT_FLAGS = 
AR = ar
AUTOCONF = ${SHELL} /home/Eion/win32-dev/thrift-0.9.2/missing autoconf
AUTOHEADER = ${SHELL} /home/Eion/win32-dev/thrift-0.9.2/missing autoheader
AUTOMAKE = ${SHELL} /home/Eion/win32-dev/thrift-0.9.2/missing automake-1.14
AWK = gawk
BISON = :
BOOST_CPPFLAGS = -I/include/boost-0
BOOST_LDFLAGS = -L/lib
BUNDLER = 
CABAL = true
CABAL_CONFIGURE_FLAGS = 
CC = gcc
CCDEPMODE = depmode=gcc3
CFLAGS = -g -O2
CLASSPATH = 
CPP = gcc -E
CPPFLAGS = 
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -D PTHREAD_MUTEX_RECURSIVE_NP=PTHREAD_MUTEX_RECURSIVE -std=c++11
CYGPATH_W = cygpath -w
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = dlltool
DMD = 
DMD_LIBEVENT_FLAGS = 
DMD_OF_DIRSEP = 
DMD_OPENSSL_FLAGS = 
DSYMUTIL = 
DUMPBIN = 
D_EVENT_LIB_NAME = thriftd-event.lib
D_IMPORT_PREFIX = ${prefix}/include/d2
D_LIB_NAME = thriftd.lib
D_SSL_LIB_NAME = thriftd-ssl.lib
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /usr/bin/grep -E
ENABLE_COVERAGE = 2
ERL = 
ERLANG_INSTALL_LIB_DIR = 
ERLANG_INSTALL_LIB_DIR_thrift = 
ERLANG_LIB_DIR = 
ERLC = 
ERLCFLAGS = 
EXEEXT = .exe
FGREP = /usr/bin/grep -F
GCOV_CFLAGS = 
GCOV_CXXFLAGS = 
GCOV_LDFLAGS = 
GLIB_CFLAGS = 
GLIB_LIBS = 
GO = 
GOBJECT_CFLAGS = 
GOBJECT_LIBS = 
GREP = /usr/bin/grep
HAVE_CXX11 = 1
INSTALL = /usr/bin/install -c
INSTALLDIRS = vendor
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
JAVA_PREFIX = /usr/local/lib
LD = c:/cygwin/home/eion/win32-dev/mingw/mingw32/bin/ld.exe
LDFLAGS = 
LEX = ${SHELL} /home/Eion/win32-dev/thrift-0.9.2/missing flex
LEXLIB = 
LEX_OUTPUT_ROOT = 
LIBEVENT_CPPFLAGS = 
LIBEVENT_LDFLAGS = 
LIBEVENT_LIBS = 
LIBOBJS = 
LIBS = -lrt -lpthread 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO = 
LN_S = ln -s
LTLIBOBJS = 
LUA = 
MAKEINFO = ${SHELL} /home/Eion/win32-dev/thrift-0.9.2/missing makeinfo
MANIFEST_TOOL = :
MKDIR_P = /usr/bin/mkdir -p
MONO_CFLAGS = 
MONO_LIBS = 
NM = /home/Eion/win32-dev/mingw/bin/nm -B
NMEDIT = 
NODEJS = /cygdrive/c/Program Files/nodejs/node
NPM = /cygdrive/c/Program Files/nodejs/npm
OBJDUMP = objdump
OBJEXT = o
OPENSSL_INCLUDES = 
OPENSSL_LDFLAGS = 
OPENSSL_LIBS = 
OTOOL = 
OTOOL64 = 
PACKAGE = thrift
PACKAGE_BUGREPORT = 
PACKAGE_NAME = thrift
PACKAGE_STRING = thrift 0.9.2
PACKAGE_TARNAME = thrift
PACKAGE_URL = 
PACKAGE_VERSION = 0.9.2
PATH_SEPARATOR = :
PERL = /usr/bin/perl
PERL_PREFIX = /usr/local
PHP = 
PHPUNIT = 
PHP_CONFIG = 
PHP_CONFIG_PREFIX = /etc/php.d
PHP_PREFIX = /usr/lib/php
PKG_CONFIG = 
PKG_CONFIG_LIBDIR = 
PKG_CONFIG_PATH = 
PYTHON = /usr/bin/python
PYTHON_EXEC_PREFIX = ${exec_prefix}
PYTHON_PLATFORM = cygwin
PYTHON_PREFIX = ${prefix}
PYTHON_VERSION = 2.7
PY_PREFIX = /usr
QT_CFLAGS = 
QT_LIBS = 
QT_MOC = 
RANLIB = ranlib
RUBY = 
RUBY_PREFIX = 
RUNHASKELL = true
SED = /usr/bin/sed
SET_MAKE = 
SHELL = /bin/sh
STRIP = strip
TRIAL = 
VERSION = 0.9.2
YACC = yacc
YFLAGS = 
ZLIB_CPPFLAGS = 
ZLIB_LDFLAGS = 
ZLIB_LIBS = 
abs_builddir = /home/Eion/win32-dev/thrift-0.9.2/lib/php
abs_srcdir = /home/Eion/win32-dev/thrift-0.9.2/lib/php
abs_top_builddir = /home/Eion/win32-dev/thrift-0.9.2
abs_top_srcdir = /home/Eion/win32-dev/thrift-0.9.2
ac_ct_AR = ar
ac_ct_CC = gcc
ac_ct_CXX = g++
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = tar --format=ustar -chf - "$$tardir"
am__untar = tar -xf -
bindir = ${exec_prefix}/bin
build = i686-pc-cygwin
build_alias = 
build_cpu = i686
build_os = cygwin
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
have_prog_bison = no
host = i686-pc-cygwin
host_alias = 
host_cpu = i686
host_os = cygwin
host_vendor = pc
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = ${SHELL} /home/Eion/win32-dev/thrift-0.9.2/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = $(MKDIR_P)
oldincludedir = /usr/include
pdfdir = ${docdir}
pkgpyexecdir = ${pyexecdir}/thrift
pkgpythondir = ${pythondir}/thrift
prefix = /usr/local
program_transform_name = s,x,x,
psdir = ${docdir}
pyexecdir = ${exec_prefix}/lib/python2.7/site-packages
pythondir = ${prefix}/lib/python2.7/site-packages
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = .
subdirs = 
sysconfdir = ${prefix}/etc
target_alias = 
top_build_prefix = ../../
top_builddir = ../..
top_srcdir = ../..
SUBDIRS = test
#phpconfdir = $(PHP_CONFIG_PREFIX)
#phpconf_DATA = thrift_protocol.ini
#phpmoduledir = `php-config --extension-dir`
#phpmodule_SCRIPTS = src/ext/thrift_protocol/modules/thrift_protocol.so
phpdir = $(PHP_PREFIX)/Thrift
phpbasedir = $(phpdir)/Base
phpbase_DATA = \
  lib/Thrift/Base/TBase.php

phpclassloaderdir = $(phpdir)/ClassLoader
phpclassloader_DATA = \
  lib/Thrift/ClassLoader/ThriftClassLoader.php

phpexceptiondir = $(phpdir)/Exception
phpexception_DATA = \
  lib/Thrift/Exception/TApplicationException.php \
  lib/Thrift/Exception/TException.php \
  lib/Thrift/Exception/TProtocolException.php \
  lib/Thrift/Exception/TTransportException.php

phpfactorydir = $(phpdir)/Factory
phpfactory_DATA = \
  lib/Thrift/Factory/TBinaryProtocolFactory.php \
  lib/Thrift/Factory/TCompactProtocolFactory.php \
  lib/Thrift/Factory/TJSONProtocolFactory.php \
  lib/Thrift/Factory/TProtocolFactory.php \
  lib/Thrift/Factory/TStringFuncFactory.php \
  lib/Thrift/Factory/TTransportFactory.php

phpprotocoldir = $(phpdir)/Protocol
phpprotocol_DATA = \
  lib/Thrift/Protocol/TBinaryProtocolAccelerated.php \
  lib/Thrift/Protocol/TBinaryProtocol.php \
  lib/Thrift/Protocol/TCompactProtocol.php \
  lib/Thrift/Protocol/TJSONProtocol.php \
  lib/Thrift/Protocol/TProtocol.php

phpprotocoljsondir = $(phpprotocoldir)/JSON
phpprotocoljson_DATA = \
  lib/Thrift/Protocol/JSON/BaseContext.php \
  lib/Thrift/Protocol/JSON/ListContext.php \
  lib/Thrift/Protocol/JSON/LookaheadReader.php \
  lib/Thrift/Protocol/JSON/PairContext.php

phpserializerdir = $(phpdir)/Serializer
phpserializer_DATA = \
  lib/Thrift/Serializer/TBinarySerializer.php

phpserverdir = $(phpdir)/Server
phpserver_DATA = \
  lib/Thrift/Server/TServerSocket.php \
  lib/Thrift/Server/TForkingServer.php \
  lib/Thrift/Server/TServer.php \
  lib/Thrift/Server/TServerTransport.php \
  lib/Thrift/Server/TSimpleServer.php

phpstringfuncdir = $(phpdir)/StringFunc
phpstringfunc_DATA = \
  lib/Thrift/StringFunc/Mbstring.php \
  lib/Thrift/StringFunc/Core.php \
  lib/Thrift/StringFunc/TStringFunc.php

phptransportdir = $(phpdir)/Transport
phptransport_DATA = \
  lib/Thrift/Transport/TBufferedTransport.php \
  lib/Thrift/Transport/TCurlClient.php \
  lib/Thrift/Transport/TFramedTransport.php \
  lib/Thrift/Transport/THttpClient.php \
  lib/Thrift/Transport/TMemoryBuffer.php \
  lib/Thrift/Transport/TNullTransport.php \
  lib/Thrift/Transport/TPhpStream.php \
  lib/Thrift/Transport/TSocket.php \
  lib/Thrift/Transport/TSocketPool.php \
  lib/Thrift/Transport/TTransport.php

phptypedir = $(phpdir)/Type
phptype_DATA = \
  lib/Thrift/Type/TMessageType.php \
  lib/Thrift/Type/TType.php

EXTRA_DIST = \
  lib \
  src/autoload.php \
  src/ext/thrift_protocol/config.w32 \
  src/ext/thrift_protocol/php_thrift_protocol.cpp \
  src/ext/thrift_protocol/php_thrift_protocol.h \
  src/ext/thrift_protocol/run-tests.php \
  src/Thrift.php \
  src/TStringUtils.php \
  thrift_protocol.ini \
  README.apache.md \
  README.md

MAINTAINERCLEANFILES = \
  Makefile \
  Makefile.in

all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign lib/php/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign lib/php/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure:  $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
install-phpmoduleSCRIPTS: $(phpmodule_SCRIPTS)
	@$(NORMAL_INSTALL)
	@list='$(phpmodule_SCRIPTS)'; test -n "$(phpmoduledir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(phpmoduledir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(phpmoduledir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  if test -f "$$d$$p"; then echo "$$d$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n' \
	    -e 'h;s|.*|.|' \
	    -e 'p;x;s,.*/,,;$(transform)' | sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1; } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) { files[d] = files[d] " " $$1; \
	      if (++n[d] == $(am__install_max)) { \
		print "f", d, files[d]; n[d] = 0; files[d] = "" } } \
	    else { print "f", d "/" $$4, $$1 } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	     if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	     test -z "$$files" || { \
	       echo " $(INSTALL_SCRIPT) $$files '$(DESTDIR)$(phpmoduledir)$$dir'"; \
	       $(INSTALL_SCRIPT) $$files "$(DESTDIR)$(phpmoduledir)$$dir" || exit $$?; \
	     } \
	; done

uninstall-phpmoduleSCRIPTS:
	@$(NORMAL_UNINSTALL)
	@list='$(phpmodule_SCRIPTS)'; test -n "$(phpmoduledir)" || exit 0; \
	files=`for p in $$list; do echo "$$p"; done | \
	       sed -e 's,.*/,,;$(transform)'`; \
	dir='$(DESTDIR)$(phpmoduledir)'; $(am__uninstall_files_from_dir)

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
install-phpbaseDATA: $(phpbase_DATA)
	@$(NORMAL_INSTALL)
	@list='$(phpbase_DATA)'; test -n "$(phpbasedir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(phpbasedir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(phpbasedir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(phpbasedir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(phpbasedir)" || exit $$?; \
	done

uninstall-phpbaseDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(phpbase_DATA)'; test -n "$(phpbasedir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(phpbasedir)'; $(am__uninstall_files_from_dir)
install-phpclassloaderDATA: $(phpclassloader_DATA)
	@$(NORMAL_INSTALL)
	@list='$(phpclassloader_DATA)'; test -n "$(phpclassloaderdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(phpclassloaderdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(phpclassloaderdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(phpclassloaderdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(phpclassloaderdir)" || exit $$?; \
	done

uninstall-phpclassloaderDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(phpclassloader_DATA)'; test -n "$(phpclassloaderdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(phpclassloaderdir)'; $(am__uninstall_files_from_dir)
install-phpconfDATA: $(phpconf_DATA)
	@$(NORMAL_INSTALL)
	@list='$(phpconf_DATA)'; test -n "$(phpconfdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(phpconfdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(phpconfdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(phpconfdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(phpconfdir)" || exit $$?; \
	done

uninstall-phpconfDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(phpconf_DATA)'; test -n "$(phpconfdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(phpconfdir)'; $(am__uninstall_files_from_dir)
install-phpexceptionDATA: $(phpexception_DATA)
	@$(NORMAL_INSTALL)
	@list='$(phpexception_DATA)'; test -n "$(phpexceptiondir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(phpexceptiondir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(phpexceptiondir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(phpexceptiondir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(phpexceptiondir)" || exit $$?; \
	done

uninstall-phpexceptionDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(phpexception_DATA)'; test -n "$(phpexceptiondir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(phpexceptiondir)'; $(am__uninstall_files_from_dir)
install-phpfactoryDATA: $(phpfactory_DATA)
	@$(NORMAL_INSTALL)
	@list='$(phpfactory_DATA)'; test -n "$(phpfactorydir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(phpfactorydir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(phpfactorydir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(phpfactorydir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(phpfactorydir)" || exit $$?; \
	done

uninstall-phpfactoryDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(phpfactory_DATA)'; test -n "$(phpfactorydir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(phpfactorydir)'; $(am__uninstall_files_from_dir)
install-phpprotocolDATA: $(phpprotocol_DATA)
	@$(NORMAL_INSTALL)
	@list='$(phpprotocol_DATA)'; test -n "$(phpprotocoldir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(phpprotocoldir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(phpprotocoldir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(phpprotocoldir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(phpprotocoldir)" || exit $$?; \
	done

uninstall-phpprotocolDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(phpprotocol_DATA)'; test -n "$(phpprotocoldir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(phpprotocoldir)'; $(am__uninstall_files_from_dir)
install-phpprotocoljsonDATA: $(phpprotocoljson_DATA)
	@$(NORMAL_INSTALL)
	@list='$(phpprotocoljson_DATA)'; test -n "$(phpprotocoljsondir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(phpprotocoljsondir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(phpprotocoljsondir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(phpprotocoljsondir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(phpprotocoljsondir)" || exit $$?; \
	done

uninstall-phpprotocoljsonDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(phpprotocoljson_DATA)'; test -n "$(phpprotocoljsondir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(phpprotocoljsondir)'; $(am__uninstall_files_from_dir)
install-phpserializerDATA: $(phpserializer_DATA)
	@$(NORMAL_INSTALL)
	@list='$(phpserializer_DATA)'; test -n "$(phpserializerdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(phpserializerdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(phpserializerdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(phpserializerdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(phpserializerdir)" || exit $$?; \
	done

uninstall-phpserializerDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(phpserializer_DATA)'; test -n "$(phpserializerdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(phpserializerdir)'; $(am__uninstall_files_from_dir)
install-phpserverDATA: $(phpserver_DATA)
	@$(NORMAL_INSTALL)
	@list='$(phpserver_DATA)'; test -n "$(phpserverdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(phpserverdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(phpserverdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(phpserverdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(phpserverdir)" || exit $$?; \
	done

uninstall-phpserverDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(phpserver_DATA)'; test -n "$(phpserverdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(phpserverdir)'; $(am__uninstall_files_from_dir)
install-phpstringfuncDATA: $(phpstringfunc_DATA)
	@$(NORMAL_INSTALL)
	@list='$(phpstringfunc_DATA)'; test -n "$(phpstringfuncdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(phpstringfuncdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(phpstringfuncdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(phpstringfuncdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(phpstringfuncdir)" || exit $$?; \
	done

uninstall-phpstringfuncDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(phpstringfunc_DATA)'; test -n "$(phpstringfuncdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(phpstringfuncdir)'; $(am__uninstall_files_from_dir)
install-phptransportDATA: $(phptransport_DATA)
	@$(NORMAL_INSTALL)
	@list='$(phptransport_DATA)'; test -n "$(phptransportdir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(phptransportdir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(phptransportdir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(phptransportdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(phptransportdir)" || exit $$?; \
	done

uninstall-phptransportDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(phptransport_DATA)'; test -n "$(phptransportdir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(phptransportdir)'; $(am__uninstall_files_from_dir)
install-phptypeDATA: $(phptype_DATA)
	@$(NORMAL_INSTALL)
	@list='$(phptype_DATA)'; test -n "$(phptypedir)" || list=; \
	if test -n "$$list"; then \
	  echo " $(MKDIR_P) '$(DESTDIR)$(phptypedir)'"; \
	  $(MKDIR_P) "$(DESTDIR)$(phptypedir)" || exit 1; \
	fi; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(phptypedir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(phptypedir)" || exit $$?; \
	done

uninstall-phptypeDATA:
	@$(NORMAL_UNINSTALL)
	@list='$(phptype_DATA)'; test -n "$(phptypedir)" || list=; \
	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
	dir='$(DESTDIR)$(phptypedir)'; $(am__uninstall_files_from_dir)

# This directory's subdirectories are mostly independent; you can cd
# into them and run 'make' without going through this Makefile.
# To change the values of 'make' variables: instead of editing Makefiles,
# (1) if the variable is set in 'config.status', edit 'config.status'
#     (which will cause the Makefiles to be regenerated when you run 'make');
# (2) otherwise, pass the desired values on the 'make' command line.
$(am__recursive_targets):
	@fail=; \
	if $(am__make_keepgoing); then \
	  failcom='fail=yes'; \
	else \
	  failcom='exit 1'; \
	fi; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

ID: $(am__tagged_files)
	$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-recursive
TAGS: tags

tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	$(am__define_uniq_tagged_files); \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: ctags-recursive

CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
	$(am__define_uniq_tagged_files); \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-recursive

cscopelist-am: $(am__tagged_files)
	list='$(am__tagged_files)'; \
	case "$(srcdir)" in \
	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
	  *) sdir=$(subdir)/$(srcdir) ;; \
	esac; \
	for i in $$list; do \
	  if test -f "$$i"; then \
	    echo "$(subdir)/$$i"; \
	  else \
	    echo "$$sdir/$$i"; \
	  fi; \
	done >> $(top_builddir)/cscope.files

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    $(am__make_dryrun) \
	      || test -d "$(distdir)/$$subdir" \
	      || $(MKDIR_P) "$(distdir)/$$subdir" \
	      || exit 1; \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile $(SCRIPTS) $(DATA)
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(phpmoduledir)" "$(DESTDIR)$(phpbasedir)" "$(DESTDIR)$(phpclassloaderdir)" "$(DESTDIR)$(phpconfdir)" "$(DESTDIR)$(phpexceptiondir)" "$(DESTDIR)$(phpfactorydir)" "$(DESTDIR)$(phpprotocoldir)" "$(DESTDIR)$(phpprotocoljsondir)" "$(DESTDIR)$(phpserializerdir)" "$(DESTDIR)$(phpserverdir)" "$(DESTDIR)$(phpstringfuncdir)" "$(DESTDIR)$(phptransportdir)" "$(DESTDIR)$(phptypedir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-phpbaseDATA install-phpclassloaderDATA \
	install-phpconfDATA install-phpexceptionDATA \
	install-phpfactoryDATA install-phpmoduleSCRIPTS \
	install-phpprotocolDATA install-phpprotocoljsonDATA \
	install-phpserializerDATA install-phpserverDATA \
	install-phpstringfuncDATA install-phptransportDATA \
	install-phptypeDATA

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am: uninstall-phpbaseDATA uninstall-phpclassloaderDATA \
	uninstall-phpconfDATA uninstall-phpexceptionDATA \
	uninstall-phpfactoryDATA uninstall-phpmoduleSCRIPTS \
	uninstall-phpprotocolDATA uninstall-phpprotocoljsonDATA \
	uninstall-phpserializerDATA uninstall-phpserverDATA \
	uninstall-phpstringfuncDATA uninstall-phptransportDATA \
	uninstall-phptypeDATA

.MAKE: $(am__recursive_targets) install-am install-strip

.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
	check-am clean clean-generic clean-libtool cscopelist-am ctags \
	ctags-am distclean distclean-generic distclean-libtool \
	distclean-tags distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-pdf install-pdf-am install-phpbaseDATA \
	install-phpclassloaderDATA install-phpconfDATA \
	install-phpexceptionDATA install-phpfactoryDATA \
	install-phpmoduleSCRIPTS install-phpprotocolDATA \
	install-phpprotocoljsonDATA install-phpserializerDATA \
	install-phpserverDATA install-phpstringfuncDATA \
	install-phptransportDATA install-phptypeDATA install-ps \
	install-ps-am install-strip installcheck installcheck-am \
	installdirs installdirs-am maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
	uninstall-am uninstall-phpbaseDATA \
	uninstall-phpclassloaderDATA uninstall-phpconfDATA \
	uninstall-phpexceptionDATA uninstall-phpfactoryDATA \
	uninstall-phpmoduleSCRIPTS uninstall-phpprotocolDATA \
	uninstall-phpprotocoljsonDATA uninstall-phpserializerDATA \
	uninstall-phpserverDATA uninstall-phpstringfuncDATA \
	uninstall-phptransportDATA uninstall-phptypeDATA


#%.so:
#	cd src/ext/thrift_protocol/ && $(MAKE)

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
